That’s quite an odd title coming from me, isn’t it? If you’ve been following a lot of my writing here and on other sites, you’ll know that I’m a real believer in good quality steaming for silk painting. But….in view of the fact that not everyone has the time, space and funds for this whole process, I thought I would share with you some of my escapades with microwaving. So here’s how I’ve been doing it.
The first problem I had with microwaving was that I didn’t own a microwave oven. I’m not going into the details here, but I prefer to cook all my food by conventional means. Okay, so that meant I had to go off to Morrisson’s and luckily they had a really basic model which suited my needs. Two dials for timing and heat. That’s all you need for what I’m going to share with you.
You’re also going to need some silk dyes, remember, the ones that are specifically for steam fixing. Not the paints which you set by heat. Read the labels on the bottles if you are unsure, or ask the shop assistant for help. You’ll also need a plain white scarf with rolled edges that you can add the dyes to.
Before you start you’ll need to get a bowl, add a mixture of 2 parts water and one part vinegar, then soak your silk scarf in this for at least 15 minutes. This will improve the dying process and ensure you get lovely bright colours that last.
You then take the silk out of the bowl, squeeze it out gently and lay it out on a surface covered with plastic sheeting. Have the dyes and brushes you’d like to use at hand, and you’re ready to go.
There is one other thing I need to point out – you will get very messy hands doing this unless you put on some rubber gloves. Which I never do, but I’m passing on this tip to you if you don’t want to run around with ghoulish fingers and nails for the next few days. 🙂
What you do next is completely up to your own imagination. You are going to start adding dyes to your heart’s content. Pick a nice colour range that would suit you and this will ensure the colours don’t clash. Splash them on with big brushes randomly. Or you can scrunch the silk up and dribble the dyes into the silk. Or what about folding it up and then painting the colours on in patterns? The example I’ve shown here is tying loose knots in the silk before applying the dye. The good news is that I’m in the process of putting together a video we took of me demonstrating this technique at a fair back in the summer, so you can copy what I did to get you started, if you like.
The important thing is that you keep the silk nice and wet so that you can properly ‘cook’ it afterwards.
Right, now you’re going to lift your silk and place it into a microwaveable dish. Don’t worry if the silk gets a little scrunched here too as your finished scarf will have an abstract pattern to it anyway. What I do next is get a piece of clingfilm and stretch this over the dish – I think it’s called Ceran wrap in the USA (that’ll save a few emails). – ah, thanks Muffy. It’s Saran wrap. 🙂 One thing you need to do at this point is prick a hole in the foil. And if you don’t do this? The foil will bulge up and may explode….making a bit of a mess.
Now we’re going to place the covered dish in the microwave for 5 minutes at a medium-high setting.
Use this time to go back and wipe your plastic covered surface clean. The last thing you want is to have dye spillage messing up your finished scarf. Or you can just lift the sheeting to one side and put it out of harm’s reach. This may sound like Kindergarten stuff, but it’s one of the main causes of people messing up their lovely silks after all the work is done. So, I just thought I’d throw it in again here.
Right, the 5 minutes are up, so remember to use some sort of cloth or glove to lift out the hot dish. Carefully remove the foil and lift out the wet scarf.
Yes, it will still be totally wet at this point but the dye is fixed so the wetness only comes from water.
Now all that is left for you to do is hang up the silk to dry. Later you can rinse it in warm water with a touch of mild shampoo to remove any excess dye and then dab it with a towel. Iron the silk dry from the reverse with a medium hot iron. Another thing you can do for a really fashionable look is twist the wet silk and leave it to dry. That will give you the look you can see in this final photo.
And there you are, ready to go. You’re now the proud owner of your very first original silk scarf. I don’t know about you, but I think this is a great way to make yourself something gorgeous in such a short space of time.
Do watch out for the video I’ll be posting in the next day or two, so that you can see the whole process in action. Have fun and let me know how things work out for you. I’d love to see your designer scarves.